View AUIRL7766M2TR1_8686566.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.irf.com 1 03/18/11 hexfet ? is a registered trademark of international rectifier. description the auirl7766m2 combines the latest automotive hexfet? power mosfet silicon technology with the advanced directfet? packaging technology to achieve exceptional performance in a package that has the footprint of an so-8 or 5x6mm pqfn and only 0.7mm profi le. the directfet ? package is compatible with existing layout geometries used in power applications, pcb assembly equipment and vapor phase, infr a- red or convection soldering techniques, when application note an-1035 is followed regarding the manufacturing methods and processes. the directfet ? package allows dual sided cooling to maximize thermal transfer in automotive power systems. this hexfet power mosfet is designed for applications where efficiency and power density are of value. the advanced directfet ? packaging platform coupled with the latest silicon technology allows the auirl7766m2 to offer substantial system level savings and performance improvement specifically in high frequency dc-dc and other heavy load applications on ice, hev and ev platforms. this mosfet utilizes the latest processing techniques to achieve low on-resistance and low qg per silicon area. additional features of this mosfet are 175c operating junction temperature and high repetitive peak current capability. these features combine to make this mosfet a highly efficient, robust and reliable device for high current automotive applications. auirl7766m2tr AUIRL7766M2TR1 automotive grade directfet isometric absolute maximum ratings stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. these are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied.exposure to absolute- maximum-rated conditions for extended periods may affect device reliability. the thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. ambient temperature (t a ) is 25c, unless otherwise specified. ? advanced process technology ? optimized for automotive dc-dc andother heavy load applications ? logic level gate drive ? exceptionally small footprint and low profile ? high power density ? low parasitic parameters ? dual sided cooling ? 175c operating temperature ? repetitive avalanche capability for robustness andreliability ? lead free, rohs compliant and halogen free ? automotive qualified * automotive directfet power mosfet applicable directfet outline and substrate outline
parameter units v ds drain-to-source voltage v gs gate-to-source voltage i d @ t c = 25c continuous drain current, v gs @ 10v (silicon limited) i d @ t c = 100c continuous drain current, v gs @ 10v (silicon limited) i d @ t a = 25c continuous drain current, v gs @ 10v (silicon limited) i dm pulsed drain current p d @t c = 25c power dissipation p d @t a = 25c power dissipation e as single pulse avalanche energy (thermally limited) e as (tested) single pulse avalanche energy tested value i ar avalanche current a e ar repetitive avalanche energy mj t p peak soldering temperature t j operating junction and t stg storage temperature range thermal resistance parameter typ. max. units r ja junction-to-ambient CCC 60 r ja junction-to-ambient 12.5 CCC r ja junction-to-ambient 20 CCC c/w r jcan junction-to-can CCC 2.4 r j-pcb junction-to-pcb mounted 1.0 CCC linear derating factor w/c 237 61 mj max. 5136 204 0.42 10 62.5 w 2.5 see fig. 18a,18b,16,17 270 c -55 to + 175 v a 16 100 sb sc m2 m4 l4 l6 l8 dd g s s s s v (br)dss 100v r ds(on) typ. 8.0m max. 10m i d (silicon limited) 51a q g 44nc downloaded from: http:///

2 www.irf.com surface mounted on 1 in. square cu (still air).
with small clip heatsink (still air) mounted on minimum footprint full size board with metalized back and with smallclip heatsink (still air) notes through are on page 11 d s g static electrical characteristics @ t j = 25c (unless otherwise stated) parameter min. typ. max. units v (br)dss drain-to-source breakdown voltage 100 CCC CCC v ? v (br)dss / ? t j breakdown voltage temp. coefficient CCC 0.067 CCC v/c r ds(on) static drain-to-source on-resistance CCC 8.0 10 m CCC 8.7 10.5 v gs(th) gate threshold voltage 1.0 CCC 2.5 v ? v gs(th) / ? t j gate threshold voltage coefficient CCC -7.3 CCC mv/c gfs forward transconductance 110 CCC CCC s r g gate resistance CCC 0.88 CCC i dss drain-to-source leakage current CCC CCC 5.0 a CCC CCC 250 i gss gate-to-source forward leakage CCC CCC 100 gate-to-source reverse leakage CCC CCC -100 dynamic electrical characteristics @ t j = 25c (unless otherwise stated) parameter min. typ. max. units q g total gate charge CCC 44 66 q gs1 pre-vth gate-to-source charge CCC 9.6 CCC q gs2 post-vth gate-to-source charge CCC 4.5 CCC nc q gd gate-to-drain ("miller") charge CCC 19 CCC q godr gate charge overdrive CCC 10.9 CCC q sw switch charge (q gs2 + q gd ) CCC 23.5 CCC q oss output charge CCC 35 CCC nc t d(on) turn-on delay time CCC 16 CCC t r rise time CCC 24 CCC ns t d(off) turn-off delay time CCC 120 CCC t f fall time CCC 49 CCC c iss input capacitance CCC 5305 CCC c oss output capacitance CCC 460 CCC c rss reverse transfer capacitance CCC 195 CCC pf c oss output capacitance CCC 2735 CCC c oss output capacitance CCC 270 CCC c oss eff. effective output capacitance CCC 370 CCC diode characteristics @ t j = 25c (unless otherwise stated) parameter min. typ. max. units i s continuous source current (body diode) a i sm pulsed source current (body diode) v sd diode forward voltage CCC CCC 1.3 v t rr reverse recovery time CCC 45 68 ns q rr reverse recovery charge CCC 83 125 nc p-n junction diode. mosfet symbol conditions v gs = 0v v ds = 25v showing the integral reverse v ds = 50v v gs = 16v v gs = 0v, v ds = 1.0v, f=1.0mhz v gs = 0v, v ds = 80v, f=1.0mhz see fig.11 conditions na conditions v gs = 0v, i d = 250 a reference to 25c, i d = 5.0ma v gs = 10v, i d = 31a v ds = 100v, v gs = 0v v ds = 100v, v gs = 0v, t j = 125c v gs = -16v v ds = 25v, i d = 31a i f = 31a, v dd = 25v di/dt = 100a/ s i s = 31a, v gs = 0v v gs = 4.5v v ds = 16v, v gs = 0v v dd = 50v, v gs = 10v i d = 31a r g = 6.8 ? = 1.0mhz v gs = 0v, v ds = 0v to 80v CCC CCC CCC 51 204 v gs = 4.5v, i d = 26a v ds = v gs , i d = 150 a i d = 31a CCC downloaded from: http:///

www.irf.com 3
!"# $%&%' ()' "* +,)",-,* qualification information ? medium-can msl1, 260c rohs compliant yes esd machine model class m4 (+/- 800v) ??? aec-q101-002 human body model class h2 (+/- 3000v) ??? aec-q101-001 charged device model n/a aec-q101-005 moisture sensitivity level qualification level automotive (per aec-q101) ?? comments: this part number(s) passed automotive qualification. irs industrial and consumer qualification level is granted by extension of the higher automotive level. downloaded from: http:///

4 www.irf.com fig 2. typical output characteristics fig 1. typical output characteristics fig 3. typical on-resistance vs. gate voltage fig 4. typical on-resistance vs. drain current fig 6. normalized on-resistance vs. temperature fig 5. typical transfer characteristics 0.1 1 10 100 1000 v ds , drain-to-source voltage (v) 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) 2.5v 60 s pulse width tj = 175c vgs top 15v 10v 7.0v 4.5v 3.5v 3.0v 2.8v bottom 2.5v 0.1 1 10 100 1000 v ds , drain-to-source voltage (v) 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) vgs top 15v 10v 7.0v 4.5v 3.5v 3.0v 2.8v bottom 2.5v 60 s pulse width tj = 25c 2.5v 1 2 3 4 5 v gs , gate-to-source voltage (v) 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) t j = -40c t j = 25c t j = 175c v ds = 50v 60 s pulse width -60 -40 -20 0 20 40 60 80 100 120 140 160 180 t j , junction temperature (c) 0.5 1.0 1.5 2.0 2.5 r d s ( o n ) , d r a i n - t o - s o u r c e o n r e s i s t a n c e ( n o r m a l i z e d ) i d = 31a v gs = 10v 0 25 50 75 100 125 150 175 200 i d , drain current (a) 0 10 20 30 40 r d s ( o n ) , d r a i n - t o - s o u r c e o n r e s i s t a n c e ( m ) t j = 25c t j = 125c vgs = 10v 2 4 6 8 10 12 14 16 v gs, gate -to -source voltage (v) 0 5 10 15 20 25 r d s ( o n ) , d r a i n - t o - s o u r c e o n r e s i s t a n c e ( m ) i d = 31a t j = 125c t j = 25c downloaded from: http:///

www.irf.com 5 fig 7. typical threshold voltage vs. junction temperature fig 8. typical source-drain diode forward voltage fig 9. typical forward transconductance vs. drain current fig 10. typical capacitance vs.drain-to-source voltage fig.11 typical gate charge vs.gate-to-source voltage fig 12. maximum drain current vs. case temperature -75 -50 -25 0 25 50 75 100 125 150 175 t j , temperature ( c ) 0.5 1.0 1.5 2.0 2.5 3.0 v g s ( t h ) , g a t e t h r e s h o l d v o l t a g e ( v ) i d = 150 a i d = 250 a i d = 1.0ma i d = 1.0a 0.0 0.2 0.4 0.6 0.8 1.0 1.2 v sd , source-to-drain voltage (v) 1.0 10 100 1000 i s d , r e v e r s e d r a i n c u r r e n t ( a ) t j = -40c t j = 25c t j = 175c v gs = 0v 0 20 40 60 80 100 120 i d ,drain-to-source current (a) 0 50 100 150 200 250 g f s , f o r w a r d t r a n s c o n d u c t a n c e ( s ) t j = 25c t j = 175c v ds = 5.0v 380 s pulse width 1 10 100 v ds , drain-to-source voltage (v) 100 1000 10000 100000 c , c a p a c i t a n c e ( p f ) v gs = 0v, f = 1 mhz c iss = c gs + c gd , c ds shorted c rss = c gd c oss = c ds + c gd c oss c rss c iss 0 2 04 06 08 01 0 01 2 0 q g , total gate charge (nc) 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 v g s , g a t e - t o - s o u r c e v o l t a g e ( v ) v ds = 80v v ds = 50v v ds = 20v i d = 31a 25 50 75 100 125 150 175 t c , case temperature (c) 0 10 20 30 40 50 60 i d , d r a i n c u r r e n t ( a ) downloaded from: http:///

6 www.irf.com fig 14. maximum avalanche energy vs. temperature fig 13. maximum safe operating area fig 15. maximum effective transient thermal impedance, junction-to-case fig 16. typical avalanche current vs.pulsewidth 25 50 75 100 125 150 175 starting t j , junction temperature (c) 0 50 100 150 200 250 e a s , s i n g l e p u l s e a v a l a n c h e e n e r g y ( m j ) i d top 6.7a 17a bottom 31a 1e-006 1e-005 0.0001 0.001 0.01 0.1 1 t 1 , rectangular pulse duration (sec) 0.001 0.01 0.1 1 10 t h e r m a l r e s p o n s e ( z t h j c ) c / w 0.20 0.10 d = 0.50 0.02 0.01 0.05 single pulse ( thermal response ) notes: 1. duty factor d = t1/t2 2. peak tj = p dm x zthjc + tc j j 1 1 2 2 3 3 r 1 r 1 r 2 r 2 r 3 r 3 ci i / ri ci= i / ri c 4 4 r 4 r 4 ri (c/w) i (sec) 0.07641 0.00002100.36635 0.0007371 0.94890 0.0391496 1.00767 0.0073206 1.0e-06 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 tav (sec) 0.01 0.1 1 10 100 1000 a v a l a n c h e c u r r e n t ( a ) 0.05 duty cycle = single pulse 0.10 allowed avalanche current vs avalanche pulsewidth, tav, assuming ? j = 25c and tstart = 150c. 0.01 allowed avalanche current vs avalanche pulsewidth, tav, assuming ? tj = 150c and tstart =25c (single pulse) 0 1 10 100 1000 v ds , drain-to-source voltage (v) 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) operation in this area limited by r ds (on) tc = 25c tj = 175c single pulse 100 sec 1msec 10msec dc downloaded from: http:///

www.irf.com 7 fig 17. maximum avalanche energy vs. temperature notes on repetitive avalanche curves , figures 16, 17:(for further info, see an-1005 at www.irf.com) 1. avalanche failures assumption: purely a thermal phenomenon and failure occurs at a temperature far in excess of t jmax . this is validated for every part type.2. safe operation in avalanche is allowed as long ast jmax is not exceeded. 3. equation below based on circuit and waveforms shown in figures 18a, 18b. 4. p d (ave) = average power dissipation per single avalanche pulse.5. bv = rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. i av = allowable avalanche current. 7. ? t = allowable rise in junction temperature, not to exceed t jmax (assumed as 25c in figure 16, 17). t av = average time in avalanche. d = duty cycle in avalanche = t av f z thjc (d, t av ) = transient thermal resistance, see figure 15) p d (ave) = 1/2 ( 1.3bvi av ) = t/ z thjc i av = 2 t/ [1.3bvz th ] e as (ar) = p d (ave) t av fig 18b. unclamped inductive waveforms fig 18a. unclamped inductive test circuit t p v (br)dss i as fig 19a. gate charge test circuit fig 19b. gate charge waveform v ds 90%10% v gs t d(on) t r t d(off) t f fig 20a. switching time test circuit fig 20b. switching time waveforms vds vgs id vgs(th) qgs1 qgs2 qgd qgodr r g i as 0.01 t p d.u.t l v ds + - v dd driver a 15v 20v v gs 1k vcc dut 0 l s 20k
1 0.1 % + - 25 50 75 100 125 150 175 starting t j , junction temperature (c) 0 10 20 30 40 50 60 70 e a r , a v a l a n c h e e n e r g y ( m j ) top single pulse bottom 1.0% duty cycle i d = 31a downloaded from: http:///

8 www.irf.com
?
please see an-1035 for directfet assembly details and stencil and substrate design recommendations g d s dd d ss s g = gate d = drain s = source downloaded from: http:///

www.irf.com 9
?
please see an-1035 for directfet assembly details and stencil and substrate design recommendations directfet ? part marking note: for the most current drawing please refer to ir website at http://www .irf.com/package/ part number logo batch number date code line above the last character of the date code indicates "lead-free" "au" = gate and automotive marking code ab cd e f gh j k l 0.047 0.094 0.156 0.032 0.018 0.024 max 0.250 1.10 2.30 3.85 0.78 0.35 0.58 min 6.25 4.80 1.20 2.40 3.95 0.82 0.45 0.62 max 6.35 5.05 0.090 0.043 0.152 0.031 0.023 0.014 min 0.189 0.246 metric imperial dimensions 0.78 0.82 0.032 0.031 0.032 0.78 0.82 0.031 0.015 0.017 0.38 0.42 l1 0.142 3.50 3.60 0.138 r 0.003 0.02 0.08 0.001 m p 0.029 0.007 0.68 0.09 0.74 0.17 0.027 0.003 dimensions are shown in millimeters (inches) 0.199 downloaded from: http:///

10 www.irf.com click on this section to link to the appropriate technical paper. click on this section to link to the directfet website.
surface mounted on 1 in. square cu board, steady state. t c measured with thermocouple mounted to top (drain) of part.
repetitive rating; pulse width limited by max. junction temperature. starting t j = 25c, l = 0.13mh, r g = 50 , i as = 31a,vgs = 20v. pulse width 400 s; duty cycle 2%.
used double sided cooling, mounting pad with large heatsink. mounted on minimum footprint full size board with metalized back and with small clip heatsink. r is measured at t j of approximately 90c. directfet ? tape & reel dimension (showing component orientation). reel dimensions note: controlling dimensions in mm std reel quantity is 4800 parts. (ordered as auirl7766m2tr). for 1000 parts on 7" reel, order AUIRL7766M2TR1 b c max n.c n.c 0.520 n.c n.c 0.724 0.567 0.606 imperial h min 330.0 20.2 12.8 1.5 100.0 n.c 12.4 11.9 standard option (qty 4800) code a b c d e f g h max n.c n.c 13.2 n.c n.c 18.4 14.4 15.4 min 12.992 0.795 0.504 0.059 3.937 n.c 0.488 0.469 metric g e f min 6.9 0.75 0.53 0.059 2.31 n.c 0.47 0.47 tr1 option (qty 1000) max n.c n.c 12.8 n.c n.c 13.50 12.01 12.01 min 177.7719.06 13.5 1.5 58.72 n.c 11.911.9 metric max n.c n.c 0.50 n.c n.c 0.53 n.c n.c imperial a d loaded tape feed direction a e note: controlling dimensions in mm code a b c d e f g h f b c imperial mi n 0.311 0.154 0.469 0.215 0.201 0.256 0.059 0.059 max 8.10 4.10 12.30 5.55 5.30 6.70 n.c 1.60 min 7.90 3.90 11.90 5.45 5.10 6.50 1.50 1.50 metric dimensions max 0.319 0.161 0.484 0.219 0.209 0.264 n.c 0.063 d h g downloaded from: http:///

www.irf.com 11
unless specifically designated for the automotive market, international rectifier corporation and its subsidiaries (ir) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any tim e and to discontinue any product or services without notice. part numbers designated with the au prefix follow automotive indus try and / or customer specific requirements with regards to product discontinuance and process change notification. all products ar e sold subject to irs terms and conditions of sale supplied at the time of order acknowledgment. ir warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with irs standard warranty. testing and other quality control techniques are used to the extent ir deems necessary to support this warr anty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.ir assumes no liability for applications assistance or customer product design. customers are responsible for their products an d applications using ir components. to minimize the risks with customer products and applications, customers should provide ad- equate design and operating safeguards. reproduction of ir information in ir data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alterations is an unfair and deceptive business practice. ir is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ir products or serviced with statements different from or beyond the parameters stated by ir for that product or serv ice voids all express and any implied warranties for the associated ir product or service and is an unfair and deceptive businesspractice. ir is not responsible or liable for any such statements. ir products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the b ody, or in other applications intended to support or sustain life, or in any other application in which the failure of the ir product could create a situation where personal injury or death may occur. should buyer purchase or use ir products for any such unintended or unauthorized application, buyer shall indemnify and hold international rectifier and its officers, employees, subsidiaries, aff iliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ir was negligent regarding the design or manufacture of the product. ir products are neither designed nor intended for use in military/aerospace applications or environments unless the ir products are specifically designated by ir as military-grade or enhanced plastic. only products designated by ir as military-grade meet m ilitary specifications. buyers acknowledge and agree that any such use of ir products which ir has not designated as military-grade is solely at the buyers risk, and that they are solely responsible for compliance with all legal and regulatory requirements in c onnection with such use. ir products are neither designed nor intended for use in automotive applications or environments unless the specific ir products are designated by ir as compliant with iso/ts 16949 requirements and bear a part number including the designation au. buyers acknowledge and agree that, if they use any non-designated products in automotive applications, ir will not be responsible for any failure to meet such requirements for technical support, please contact irs technical assistance center http://www .irf.com/technical-info/ world headquarters: 101 n. sepulveda blvd., el segundo, california 90245 tel: (310) 252-7105 downloaded from: http:///

▲Up To Search▲

Price & Availability of AUIRL7766M2TR1

	To Download AUIRL7766M2TR1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .